Rotenso heat pumps
Air/water monoblocAir/water split 8 series
Rotenso is a Polish air-conditioning, ventilation and heat pump brand owned by Thermosilesia sp. z o.o. sp. k.; the heat pumps are placed on the market by Rotenso Sp. z o.o. in Ruda Śląska. The range consists of R32 air-to-water units for the Polish market: the Aquami family (monobloc from 4 to 30 kW, split with hydrobox, All in Split with a built-in 190 or 240 l hot water tank, and the Multi hybrid that shares its outdoor unit with up to three air conditioners), the Airmi monobloc and split in three casing colours, the compact Heatmi split and the Windmi monobloc. Rotenso does not name the factory that builds the units.
Checked November 2, 2026 · Ruda Śląska, Poland · Manufacturer website
Photo: Rotenso
Grant lists
BAFA WEP (Germany)
0 / 8 checked November 4, 2026
ZUM (Poland)
7 / 8 checked November 4, 2026
Rotenso in Zerofy
Zerofy has no integration for Rotenso yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
Rotenso heat pump types
Rotenso Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR32
Rotenso Aquami Monoblock
9 models
- Output
- 4.2–30.1 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 7 models listed
- Zerofy
- Via SG Ready
Air/water monoblocR32
Rotenso Airmi Monoblock
7 models
- Output
- 4–15.9 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 15 models listed
- Zerofy
- Via SG Ready
Air/water monoblocR32
Rotenso Windmi Monoblock
6 models
- Output
- 6–16 kW
- SCOP 35 °C
- –
- Max. flow
- 62 °C
- BAFA WEP
- No model on the list
- ZUM
- 3 models listed
- Zerofy
- Not supported
Rotenso Air-to-water split
An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.
Air/water splitR32
Rotenso Aquami All in Split
11 models
- Output
- 4.3–16 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 11 models listed
- Zerofy
- Via SG Ready
Air/water splitR32
Rotenso Aquami Split
7 models
- Output
- 4.3–16 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 7 models listed
- Zerofy
- Via SG Ready
Air/water splitR32
Rotenso Aquami Multi
1 model
- Output
- 8 kW
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- No model on the list
- Zerofy
- Via SG Ready
Air/water splitR32
Rotenso Airmi Split
7 models
- Output
- 4.2–16.2 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 15 models listed
- Zerofy
- Via SG Ready
Air/water splitR32
Rotenso Heatmi Split
4 models
- Output
- 4.3–9.5 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 4 models listed
- Zerofy
- Via SG Ready
Rotenso series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Aquami Monoblock | Air/water monobloc | 4.2–30.1 kW | – | – | R32 | 65 °C | No model on the list | 7 models listed | Yes | –Not documented | –Not documented |
| Airmi Monoblock | Air/water monobloc | 4–15.9 kW | – | – | R32 | 65 °C | No model on the list | 15 models listed | Yes | –Not documented | –Not documented |
| Windmi Monoblock | Air/water monobloc | 6–16 kW | – | – | R32 | 62 °C | No model on the list | 3 models listed | –Not documented | –Not documented | –Not documented |
| Aquami All in Split | Air/water split | 4.3–16 kW | – | – | R32 | 65 °C | No model on the list | 11 models listed | Yes | –Not documented | –Not documented |
| Aquami Split | Air/water split | 4.3–16 kW | – | – | R32 | 65 °C | No model on the list | 7 models listed | Yes | –Not documented | –Not documented |
| Aquami Multi | Air/water split | 8 kW | – | – | R32 | 60 °C | No model on the list | No model on the list | Yes | –Not documented | –Not documented |
| Airmi Split | Air/water split | 4.2–16.2 kW | – | – | R32 | 65 °C | No model on the list | 15 models listed | Yes | –Not documented | –Not documented |
| Heatmi Split | Air/water split | 4.3–9.5 kW | – | – | R32 | 65 °C | No model on the list | 4 models listed | Yes | –Not documented | –Not documented |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- rotenso.com/en/heat-pumps/
- rotenso.com/pl/kategoria-produktu/pompy-ciepla/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-monoblock/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-split/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-all-in-split/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-multi/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-airmi-monoblock/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-airmi-split/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-heatmi-split/
- rotenso.com/pl/produkt/pompa-ciepla-rotenso-windmi-monoblock/
- rotenso.com/pl/kontakt/
- thermosilesia.pl/pl/page/informacje-o-firmie
- thermosilesia.pl/assets/default/system_object_files/9dbf70f8b1902efee3faee6a832cadb8.pdf
- thermosilesia.pl/assets/default/system_object_files/0c744317d86b363a0afe0e1f3ef5b2ad.pdf
- lista-zum.ios.edu.pl/
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.