De Dietrich heat pumps
Air/water monoblocAir/water splitGround sourceHot water 8 series
De Dietrich is a French heating brand from Mertzwiller in Alsace, run by BDR Thermea France and part of BDR Thermea Group together with Remeha and Baxi. Its heat pumps are sold mainly in France and, through BDR Thermea Poland, in Poland: the Alezio M R290 / Alezio M 3R EU and Alezio M R32 monoblocks, the Alezio S R32 and HPI-S splits, the Strateo R32 split with a built-in hot water tank, the GSHP ground source units and the Elensio hot water heat pump. Most are shared group platforms: Alezio M R290 is the Remeha Confida MB 400 and Baxi Auriga P, Alezio M R32 (Modena in Poland) is the Remeha Tensio C and Baxi Auriga, and the Strateo R32 outdoor unit is the one in the Remeha Mercuria Ace / Eria Tower Ace and Baxi Platinum BC Smart iR32.
Checked November 2, 2026 · Mertzwiller, France · Manufacturer website
Photo: De Dietrich
Grant lists
BAFA WEP (Germany)
0 / 8 checked November 4, 2026
ZUM (Poland)
8 / 8 checked November 4, 2026
De Dietrich in Zerofy
Zerofy has no integration for De Dietrich yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
De Dietrich heat pump types
De Dietrich Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR290
De Dietrich Alezio M R290 / Alezio M 3R EU
14 models
- Output
- 4.4–13.5 kW
- SCOP 35 °C
- 4.7–5.34
- Max. flow
- 75 °C
- BAFA WEP
- No model on the list
- ZUM
- 10 models listed
- Zerofy
- Not supported
Air/water monoblocR32
De Dietrich Alezio M R32 / Modena
14 models
- Output
- 4.2–15.9 kW
- SCOP 35 °C
- 4.62–5.22
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- 6 models listed
- Zerofy
- Not supported
De Dietrich Air-to-water split
An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.
Air/water splitR32
De Dietrich Alezio S R32
13 models
- Output
- 4.3–16 kW
- SCOP 35 °C
- 4.5–5.21
- Max. flow
- 65 °C
- BAFA WEP
- No model on the list
- ZUM
- 12 models listed
- Zerofy
- Via SG Ready
Air/water splitR32
De Dietrich Strateo R32
7 models
- Output
- 6.4–7.6 kW
- SCOP 35 °C
- 4.04–4.5
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- 3 models listed
- Zerofy
- Not supported
Air/water splitR410A
De Dietrich HPI-S
10 models
- Output
- 4.6–24.4 kW
- SCOP 35 °C
- 3.86–4.8
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- 6 models listed
- Zerofy
- Not supported
Air/water split
De Dietrich Alezio S / Alezio S V200 (previous generation)
12 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- 20 models listed
- Zerofy
- Not supported
De Dietrich Ground-source (brine/water)
Draws heat from a borehole or ground loop, so the source stays at a steady temperature all winter. Higher efficiency and no outdoor noise, but boreholes cost money and need a permit.
Ground source
De Dietrich GSHP
11 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- –
- BAFA WEP
- No model on the list
- ZUM
- 9 models listed
- Zerofy
- Not supported
De Dietrich Hot water heat pumps
A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.
Hot waterR290
De Dietrich Elensio
4 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- –
- BAFA WEP
- Not confirmed
- ZUM
- 4 models listed
- Zerofy
- Not supported
De Dietrich series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Alezio M R290 / Alezio M 3R EU | Air/water monobloc | 4.4–13.5 kW | 4.7–5.34 | 3.73–3.99 | R290 | 75 °C | No model on the list | 10 models listed | –Not documented | Yes | –Not documented |
| Alezio M R32 / Modena | Air/water monobloc | 4.2–15.9 kW | 4.62–5.22 | 3.31–3.52 | R32 | 60 °C | No model on the list | 6 models listed | –Not documented | Yes | –Not documented |
| Alezio S R32 | Air/water split | 4.3–16 kW | 4.5–5.21 | 3.58–3.67 | R32 | 65 °C | No model on the list | 12 models listed | Yes | –Not documented | –Not documented |
| Strateo R32 | Air/water split | 6.4–7.6 kW | 4.04–4.5 | 2.99–3.37 | R32 | 60 °C | No model on the list | 3 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| HPI-S | Air/water split | 4.6–24.4 kW | 3.86–4.8 | 2.87–3.42 | R410A | – | No model on the list | 6 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| Alezio S / Alezio S V200 (previous generation) | Air/water split | – | – | – | – | – | No model on the list | 20 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| GSHP | Ground source | – | – | – | – | – | No model on the list | 9 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
| Elensio | Hot water | – | – | – | R290 | – | Not confirmed | 4 models listed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- www.dedietrich-thermique.fr/nos-produits/pompe-a-chaleur
- dedietrich.pl/produkty/technika-dla-domu/pompy-ciepla/
- dedietrich.pl/produkty/technika-dla-domu/pompy-ciepla/alezio-m-r290/
- dedietrich.pl/produkty/technika-dla-domu/pompy-ciepla/alezio-s-r32/
- dedietrich.pl/produkty/technika-dla-domu/archiwum/modena/
- dedietrich.pl/produkty/technika-dla-domu/archiwum/strateo-r32/
- dedietrich.pl/produkty/technika-dla-domu/pompy-ciepla/hpi-s/
- lista-zum.ios.edu.pl/
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.