Alpha Innotec heat pumps
Air/water monoblocGround sourceHot water 9 series
alpha innotec is a German heat pump brand of ait-deutschland GmbH in Kasendorf, Bavaria, which says it has been developing heat pumps since 1998. The range today consists of the Hybrox and Hybrox SE R290 air-to-water units, brine-to-water units (SW, SWC, WZS, WZSV, SWCV and the R290 models SWCV 63 and WZSV 63) and the BWP hot water heat pump, mostly controlled by the Luxtronik regulator.
Checked November 2, 2026 · Kasendorf, Germany · Manufacturer website · Datasheet library
Photo: Alpha Innotec
Grant lists
BAFA WEP (Germany)
8 / 9 checked November 4, 2026
ZUM (Poland)
4 / 9 checked November 4, 2026
Alpha Innotec in Zerofy
Zerofy integrationZerofy reads Alpha Innotec heat pumps through the manufacturer's cloud (myUplink), with the account the heat pump is already registered with. Autopilot then moves heat into the building and the hot water tank when your own solar power is available or the electricity price is low.
What Zerofy can do with it:
Heating statusHot water statusHot water boostSolar AutopilotSmart Autopilot (tariff-optimised heating)
Alpha Innotec heat pump types
Alpha Innotec Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR290
Alpha Innotec Hybrox
5 models
- Output
- 5–18 kW
- SCOP 35 °C
- 4.69–5
- Max. flow
- 78 °C
- BAFA WEP
- 5 models listed
- ZUM
- 4 models listed
- Zerofy
- Native
Air/water monoblocR290
Alpha Innotec Hybrox SE
4 models
- Output
- 4.1–10.6 kW
- SCOP 35 °C
- 4.75–5.15
- Max. flow
- 75 °C
- BAFA WEP
- 7 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Air/water monoblocR410A
Alpha Innotec LWAV / LWCV / LWV
8 models
- Output
- 6–10 kW
- SCOP 35 °C
- 4.41–4.64
- Max. flow
- 60 °C
- BAFA WEP
- 27 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Air/water monoblocR407C
Alpha Innotec LW / LWA
6 models
- Output
- 10.2–18.2 kW
- SCOP 35 °C
- 3.96–4
- Max. flow
- 60 °C
- BAFA WEP
- 3 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Air/water monoblocR290Discontinued
Alpha Innotec LWD / LWDV
4 models
- Output
- 5.7–7.6 kW
- SCOP 35 °C
- 4.02–4.9
- Max. flow
- 70 °C
- BAFA WEP
- 6 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Alpha Innotec Ground-source (brine/water)
Draws heat from a borehole or ground loop, so the source stays at a steady temperature all winter. Higher efficiency and no outdoor noise, but boreholes cost money and need a permit.
Ground sourceR290
Alpha Innotec SWCV 63 / WZSV 63
4 models
- Output
- 6 kW
- SCOP 35 °C
- 5.14
- Max. flow
- 75 °C
- BAFA WEP
- 4 models listed
- ZUM
- 2 models listed
- Zerofy
- Native
Ground sourceR407C
Alpha Innotec WZSV / SWCV
8 models
- Output
- 5.4–15.9 kW
- SCOP 35 °C
- –
- Max. flow
- 65 °C
- BAFA WEP
- 7 models listed
- ZUM
- 14 models listed
- Zerofy
- Native
Ground sourceR410A
Alpha Innotec SW / SWC / WZS
10 models
- Output
- 4.7–29.6 kW
- SCOP 35 °C
- 5.15–5.56
- Max. flow
- 65 °C
- BAFA WEP
- 14 models listed
- ZUM
- 33 models listed
- Zerofy
- Native
Alpha Innotec Hot water heat pumps
A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.
Hot waterR134A
Alpha Innotec BWP
2 models
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- –
- BAFA WEP
- Not confirmed
- ZUM
- Not confirmed
- Zerofy
- Native
Alpha Innotec series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hybrox | Air/water monobloc | 5–18 kW | 4.69–5 | 3.63–3.9 | R290 | 78 °C | 5 models listed | 4 models listed | Yes | Yes | –Not documented |
| Hybrox SE | Air/water monobloc | 4.1–10.6 kW* | 4.75–5.15 | 3.38–3.98 | R290 | 75 °C | 7 models listed | No model on the list | Yes | –Not documented | –Not documented |
| LWAV / LWCV / LWV | Air/water monobloc | 6–10 kW* | 4.41–4.64 | 3.38–3.51 | R410A | 60 °C | 27 models listed | No model on the list | Yes | –Not documented | –Not documented |
| LW / LWA | Air/water monobloc | 10.2–18.2 kW* | 3.96–4 | 3.2–3.36 | R407C | 60 °C | 3 models listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
| LWD / LWDV Discontinued | Air/water monobloc | 5.7–7.6 kW* | 4.02–4.9 | 3.25–3.75 | R290 | 70 °C | 6 models listed | No model on the list | Yes | –Not documented | –Not documented |
| SWCV 63 / WZSV 63 | Ground source | 6 kW | 5.14 | 3.95–3.96 | R290 | 75 °C | 4 models listed | 2 models listed | Yes | Yes | –Not documented |
| WZSV / SWCV | Ground source | 5.4–15.9 kW* | – | 3.9–4.13 | R407C | 65 °C | 7 models listed | 14 models listed | Yes | Yes | –Not documented |
| SW / SWC / WZS | Ground source | 4.7–29.6 kW | 5.15–5.56 | 3.7–3.93 | R410A | 65 °C | 14 models listed | 33 models listed | Yes | –Not documented | –Not documented |
| BWP | Hot water | – | – | – | R134A | – | Not confirmed | Not confirmed | ?Not confirmed | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- www.alpha-innotec.com/de/produkte
- www.alpha-innotec.com/de/produkte/zubehor/regelung/luxtronik
- www.alpha-innotec.com/de/produkte/zubehor/regelung/hpc
- www.alpha-innotec.com/de/produkte/zubehor/smart-home---apps/knx-schnittstelle-fur-warme...
- www.alpha-innotec.com/de/produkte/zubehor/smart-home---apps/myuplink
- www.alpha-innotec.ch/alpha-innotec/produkte/waermepumpen/luftwasser/hybrox-se-serie.html
- dev.myuplink.com
- www.alpha-innotec.com/de/uber-uns
- www.alpha-innotec.com/de/footer/impressum
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.