Hisense heat pumps

Air/water monoblocAir/water splitHot water 6 series

Hisense is a Chinese appliance and air-conditioning manufacturer based in Qingdao; in Germany its heat pumps are registered by Hisense Gorenje Germany GmbH. The residential air-to-water range is sold as Hi-Therma: the R32 generation (Monobloc, Split, Integra with built-in tank, up to 16 kW) and the newer Hi-Therma II with R290 refrigerant (Mono Solution and Hydro Solution), plus a domestic hot water heat pump.

Checked November 2, 2026 · Qingdao, China · Manufacturer website

Grant lists

BAFA WEP (Germany)

3 / 6 checked November 4, 2026

ZUM (Poland)

3 / 6 checked November 4, 2026

Hisense in Zerofy

Zerofy has no integration for Hisense yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.

Hisense heat pump types

Air-to-water monoblock3 Air-to-water split2 Hot water heat pumps1

Hisense Air-to-water monoblock

The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.

Air/water monoblocR290

Hisense Hi-Therma II Mono Solution

10 models

Output: –
SCOP 35 °C: –
Max. flow: 75 °C
BAFA WEP: No model on the list
ZUM: No model on the list
Zerofy: Not supported

Details and listed models

Air/water monoblocR290

Hisense Hi-Therma II Hydro Solution

5 models

Output: –
SCOP 35 °C: –
Max. flow: –
BAFA WEP: No model on the list
ZUM: No model on the list
Zerofy: Not supported

Details and listed models

Air/water monoblocR32

Hisense Hi-Therma Monobloc (R32)

4 models

Output: 4.4–16 kW
SCOP 35 °C: 4.47
Max. flow: –
BAFA WEP: 1 model listed
ZUM: 3 models listed
Zerofy: Via SG Ready

Details and listed models

Hisense Air-to-water split

An outdoor unit plus an indoor hydraulic station, joined by refrigerant lines. The pipework inside the house stays frost-free without glycol, and the indoor part is often quieter to place.

Air/water splitR32

Hisense Hi-Therma Split (R32)

7 models

Output: 4.4–16 kW
SCOP 35 °C: 4.49
Max. flow: –
BAFA WEP: 1 model listed
ZUM: 7 models listed
Zerofy: Via SG Ready

Details and listed models

Air/water splitR32

Hisense Hi-Therma Integra (R32)

7 models

Output: 4.4–16 kW
SCOP 35 °C: 4.49
Max. flow: –
BAFA WEP: 1 model listed
ZUM: 7 models listed
Zerofy: Via SG Ready

Details and listed models

Hisense Hot water heat pumps

A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.

Hot water

Hisense Hisense DHW heat pump

Output: –
SCOP 35 °C: –
Max. flow: –
BAFA WEP: Not confirmed
ZUM: Not confirmed
Zerofy: Via SG Ready

Details and listed models

Hisense series at a glance

Series	Type	Output	SCOP 35 °C	SCOP 55 °C	Refrigerant	Max. flow	BAFA WEP	ZUM	SG Ready	Modbus	EEBUS
Hi-Therma II Mono Solution	Air/water monobloc	–	–	–	R290	75 °C	No model on the list	No model on the list	?Not confirmed	?Not confirmed	?Not confirmed
Hi-Therma II Hydro Solution	Air/water monobloc	–	–	–	R290	–	No model on the list	No model on the list	?Not confirmed	?Not confirmed	?Not confirmed
Hi-Therma Monobloc (R32)	Air/water monobloc	4.4–16 kW	4.47	3.35	R32	–	1 model listed	3 models listed	Yes	–Not documented	–Not documented
Hi-Therma Split (R32)	Air/water split	4.4–16 kW	4.49	3.28	R32	–	1 model listed	7 models listed	Yes	–Not documented	–Not documented
Hi-Therma Integra (R32)	Air/water split	4.4–16 kW	4.49	3.28	R32	–	1 model listed	7 models listed	Yes	–Not documented	–Not documented
Hisense DHW heat pump	Hot water	–	–	–	–	–	Not confirmed	Not confirmed	Yes	–Not documented	–Not documented

Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.

Sources

Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:

SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.

Heat with your own solar power

Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.

Get Zerofy

Other heat pump brands

Aermec Aira Alpha Innotec Ariston Atlantic Austria Email AUX Baxi Beretta Bosch Buderus Carrier Clivet Cooper&Hunter CTA CTC Daikin De Dietrich Defro Fujitsu General Galmet Gree Haier Hargassner Heiztechnik Hewalex Hitachi HKS Lazar Ideal Heating iDM Energiesysteme Immergas Intergas Kaisai Kermi Kołton Kospel Kostrzewa LAMBDA Wärmepumpen LG Midea Mitsubishi Electric NIBE Novelan Ochsner OVUM Heiztechnik Panasonic PHNIX Qvantum Remeha Rotenso Samsung Sauter Sevra Sinclair Stiebel Eltron Tecalor Thermia Thermor Toshiba Vaillant Vasco Viessmann Weheat Weishaupt Wolf YORK

Compare all brands in the heat pump database.