Kospel heat pumps
Air/water monoblocHot water 3 series
Kospel is a manufacturer of heating equipment based in Koszalin, Poland. Its heat pump range consists of the second-generation HPM2 monoblock air-to-water heat pumps, sold either with an HPMD 3-in-1 indoor unit (HPM2.C) or with an HPMI2 hydraulic indoor unit (HPM2.Z), and the HPSW2-250 domestic hot water heat pump.
Checked November 2, 2026 · Koszalin, Poland · Manufacturer website · Datasheet library
Photo: Kospel
Grant lists
BAFA WEP (Germany)
0 / 3 checked November 4, 2026
ZUM (Poland)
3 / 3 checked November 4, 2026
Kospel in Zerofy
Zerofy has no integration for Kospel yet. Where a series below has an SG Ready input, Zerofy can still switch it through a Shelly relay. The heat pump comparison lists every brand Zerofy supports.
Kospel heat pump types
Kospel Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR32
Kospel HPM2.C
6 models
- Output
- 8.2–23 kW
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- 3 models listed
- Zerofy
- Not supported
Air/water monoblocR32
Kospel HPM2.Z
6 models
- Output
- 8.2–23 kW
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- 6 models listed
- Zerofy
- Not supported
Kospel Hot water heat pumps
A small heat pump built onto a hot water tank. It heats drinking water only and is a good way to turn surplus solar into stored heat – or to add hot water to a house that is otherwise heated differently.
Hot waterR134a
Kospel HPSW2-250
1 model
- Output
- –
- SCOP 35 °C
- –
- Max. flow
- 60 °C
- BAFA WEP
- No model on the list
- ZUM
- 1 model listed
- Zerofy
- Not supported
Kospel series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HPM2.C | Air/water monobloc | 8.2–23 kW | – | – | R32 | 60 °C | No model on the list | 3 models listed | –Not documented | –Not documented | –Not documented |
| HPM2.Z | Air/water monobloc | 8.2–23 kW | – | – | R32 | 60 °C | No model on the list | 6 models listed | –Not documented | –Not documented | –Not documented |
| HPSW2-250 | Hot water | – | – | – | R134a | 60 °C | No model on the list | 1 model listed | –Not documented | –Not documented | –Not documented |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked November 2, 2026:
- kospel.pl/produkty/pompy-ciepla/
- kospel.pl/pompy-ciepla/hpm2c.html
- kospel.pl/pompy-ciepla/hpm2z.html
- kospel.pl/pompy-ciepla-cwu/hpsw2.html
- kospel.pl/img/cms/do-pobrania/Pompyciepla/HPM2C/PL/karta%20katalogowa%20HPM2_C%202024-0...
- kospel.pl/img/cms/do-pobrania/Pompyciepla/HPM2C/HPM2-C_PL-117B_f-1921.pdf
- kospel.pl/img/cms/do-pobrania/Pompyciepla/HPM2z/PL/karta%20katalogowa%20HPM2_Z-V-P%2020...
- kospel.pl/img/cms/do-pobrania/Pompyciepla/HPM2z/PL/HPM2-Z_PL-115B_f-1537.pdf
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- lista-zum.ios.edu.pl/
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.