CTA heat pumps
Air/water monoblocGround source 5 series
CTA AG is a Swiss heat pump manufacturer. On the German BAFA list it has Aeroheat air-to-water units (AH CL, AH CV, AH SCI) and Optiheat brine-to-water and water-to-water units (OH CT, Optiheat Inverta).
Checked October 30, 2026 · Manufacturer website
Grant lists
BAFA WEP (Germany)
5 / 5 checked November 4, 2026
ZUM (Poland)
0 / 5 checked November 4, 2026
CTA in Zerofy
Zerofy integrationZerofy reads CTA heat pumps through the manufacturer's cloud, with the account the heat pump is already registered with. Autopilot then moves heat into the building and the hot water tank when your own solar power is available or the electricity price is low.
What Zerofy can do with it:
Heating statusHot water statusHot water boostSolar AutopilotSmart Autopilot (tariff-optimised heating)
CTA heat pump types
CTA Air-to-water monoblock
The whole refrigerant circuit sits in one outdoor unit; only water pipes run into the house. The most common choice for retrofits, because no refrigerant lines need to be installed inside.
Air/water monoblocR290
CTA Aeroheat AH CL
5 models
- Output
- 6.2–17.2 kW
- SCOP 35 °C
- 4.66–5
- Max. flow
- –
- BAFA WEP
- 5 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Air/water monoblocR290
CTA Aeroheat AH CV
2 models
- Output
- 9–14 kW
- SCOP 35 °C
- 5.3–5.32
- Max. flow
- –
- BAFA WEP
- 2 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Air/water monoblocR32
CTA Aeroheat AH SCI
1 model
- Output
- 20.5 kW
- SCOP 35 °C
- 4.8
- Max. flow
- –
- BAFA WEP
- 1 model listed
- ZUM
- No model on the list
- Zerofy
- Native
CTA Ground-source (brine/water)
Draws heat from a borehole or ground loop, so the source stays at a steady temperature all winter. Higher efficiency and no outdoor noise, but boreholes cost money and need a permit.
Ground sourceR290
CTA Optiheat OH CT
4 models
- Output
- 6–16.5 kW
- SCOP 35 °C
- 5.04–5.3
- Max. flow
- –
- BAFA WEP
- 4 models listed
- ZUM
- No model on the list
- Zerofy
- Native
Ground sourceR410A
CTA Optiheat Inverta
4 models
- Output
- 7–30.4 kW
- SCOP 35 °C
- 5.15–5.4
- Max. flow
- –
- BAFA WEP
- 4 models listed
- ZUM
- No model on the list
- Zerofy
- Native
CTA series at a glance
| Series | Type | Output | SCOP 35 °C | SCOP 55 °C | Refrigerant | Max. flow | BAFA WEP | ZUM | SG Ready | Modbus | EEBUS |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Aeroheat AH CL | Air/water monobloc | 6.2–17.2 kW* | 4.66–5 | 3.63–3.9 | R290 | – | 5 models listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
| Aeroheat AH CV | Air/water monobloc | 9–14 kW* | 5.3–5.32 | 4–4.05 | R290 | – | 2 models listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
| Aeroheat AH SCI | Air/water monobloc | 20.5 kW* | 4.8 | 3.5 | R32 | – | 1 model listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
| Optiheat OH CT | Ground source | 6–16.5 kW* | 5.04–5.3 | 3.73–3.98 | R290 | – | 4 models listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
| Optiheat Inverta | Ground source | 7–30.4 kW* | 5.15–5.4 | 3.83–3.98 | R410A | – | 4 models listed | No model on the list | Yes | ?Not confirmed | ?Not confirmed |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Sources
Specifications come from the manufacturer's datasheets linked above, grant status from the official lists below, checked October 30, 2026:
- elan1.bafa.bund.de/zvi-ui/wep/waermepumpen
- lista-zum.ios.edu.pl/bepub/ben001.aspx
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get ZerofyOther heat pump brands
Compare all brands in the heat pump database.