Rotenso Aquami Monoblock

Air-to-water monoblock · 9 models · PL

R32 monobloc in nine sizes from 4.2 to 30.1 kW at A7/W35; the 4 to 16 kW units reach 65 °C flow and operate down to -25 °C, the two-fan "Big Mono" 22 and 30 kW units are limited to 60 °C. Single-phase up to 10 kW with a 3 kW heater, three-phase above with 9 kW in three steps. Rotenso lists an SG Ready certificate; the Reni controller has a BMS address menu but Rotenso does not say which Modbus transport it uses.

Output4.2–30.1 kW

SCOP 35 °C–

SCOP 55 °C–

Max. flow65 °C

Datasheet Product page All Rotenso heat pumps

Grant lists

Grants depend on the exact model being on the official list. The counts below are the entries of this series we found in each list.

BAFA WEP (Germany)

No model on the list

No model of this series is in the BAFA Wärmeerzeuger-Portal, so it cannot be funded under the German BEG grant.

checked November 4, 2026

ZUM (Poland)

7 models listed

7 models of this series are on the Lista ZUM, which the Polish Czyste Powietrze grant requires.

checked November 4, 2026 · See the entries

Specifications

Type	Air-to-water monoblock
Heating output (datasheet)	4.2–30.1 kW
SCOP at 35 °C	–
SCOP at 55 °C	–
Refrigerant	R32 (GWP 675)
Outdoor sound power	55–77 dB(A)
Max. flow temperature	65 °C
Built-in backup heater	3–9 kW
Markets	PL

Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.

Control and connectivity

SG Ready	Yes
Modbus	Not documented
EEBUS	Not documented
Cloud API	not confirmed (iLetComfort) – Rotenso says the app comes from a third-party developer
§14a EnWG control	not confirmed
Local interfaces	SG Ready

Source: rotenso.com/pl/produkt/pompa-ciepla-rotenso-aquami-monobl... · thermosilesia.pl/assets/default/system_object_files/1989c... · thermosilesia.pl/assets/default/system_object_files/0c50d...

Zerofy

Via SG Ready

Zerofy has no native Rotenso integration yet, but this series has an SG Ready input: Zerofy can switch it through a Shelly relay on the SG Ready terminals.

Rotenso in Zerofy

Models in this series

Model codes as the manufacturer documents them. The official list entries, with their own naming, follow below.

AQM40X1AQM60X1AQM80X1AQM100X1AQM120X3AQM140X3AQM160X3AQM220X3AQM300X3

Models on the ZUM list 7

On the Lista ZUM on November 4, 2026, with the list's own device number.

Model	ZUM id
AQM100X1 R14	PW-214680
AQM120X3 R14	PW-014681
AQM140X3 R14	PW-814682
AQM160X3 R14	PW-614683
AQM40X1 R14	PW-512340
AQM60X1 R14	PW-614678
AQM80X1 R14	PW-414679

Entries as published in the official lists on the date shown; names and numbers are copied verbatim. Check the list for your exact model before you order.

More Rotenso heat pumps

Rotenso Aquami All in Split Air/water split · R32 BAFA No model on the list

Rotenso Aquami Split Air/water split · R32 BAFA No model on the list

Rotenso Aquami Multi Air/water split · R32 BAFA No model on the list

Rotenso Airmi Monoblock Air/water monobloc · R32 BAFA No model on the list

Rotenso Airmi Split Air/water split · R32 BAFA No model on the list

Rotenso Heatmi Split Air/water split · R32 BAFA No model on the list

Rotenso Windmi Monoblock Air/water monobloc · R32 BAFA No model on the list

All Rotenso heat pumps

Sources

All figures are taken from the manufacturers' datasheets and the official BAFA and ZUM lists on the date shown and may have changed since. This is not grant advice – check the list and your grant conditions before you order. Zerofy is not affiliated with any of the manufacturers listed.

SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.

Heat with your own solar power

Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.

Get Zerofy