Hitachi Yutaki S 2.0 / S Combi

Photo: Hitachi

Air/water split

Hitachi Yutaki S 2.0 / S Combi

Air-to-water split · 9 models

Split heat pump with a wall-mounted indoor unit (RWM) or the S Combi indoor unit with hot water tank (RWD). Up to 60 °C flow at -10 °C outdoor temperature without electric backup, depending on the model.

Output–
SCOP 35 °C–
SCOP 55 °C–
Max. flow60 °C

Product page All Hitachi heat pumps

Grant lists

Grants depend on the exact model being on the official list. The counts below are the entries of this series we found in each list.

BAFA WEP (Germany)

No model on the list

No model of this series is in the BAFA Wärmeerzeuger-Portal, so it cannot be funded under the German BEG grant.

checked November 4, 2026

ZUM (Poland)

6 models listed

6 models of this series are on the Lista ZUM, which the Polish Czyste Powietrze grant requires.

checked November 4, 2026 · See the entries

Specifications

TypeAir-to-water split
SCOP at 35 °C–
SCOP at 55 °C–
Refrigerant–
Outdoor sound power–
Max. flow temperature60 °C

Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.

Control and connectivity

SG ReadyNot confirmed
ModbusNot confirmed
EEBUSNot confirmed
Cloud APInot confirmed
§14a EnWG controlnot confirmed

Zerofy

Not supported

Zerofy cannot control this series yet: there is no native Hitachi integration and no documented SG Ready input.

Hitachi in Zerofy

Models in this series

Model codes as the manufacturer documents them. The official list entries, with their own naming, follow below.

RAS-4WHNPERAS-5WHNPERAS-6WHNPERWM-4.0N1ERWM-5.0N1ERWM-6.0N1ERWD-4.0NW1E-220SRWD-5.0NW1E-220SRWD-6.0NW1E-220S

Models on the ZUM list 6

On the Lista ZUM on November 4, 2026, with the list's own device number.

ModelZUM id
RAS-4WHNPE + RWD-4.0NW1E-220SPW-118947
RAS-4WHNPE + RWM-4.0N1EPW-119193
RAS-5WHNPE + RWD-5.0NW1E-220SPW-219197
RAS-5WHNPE + RWM-5.0N1EPW-919194
RAS-6WHNPE + RWD-6.0NW1E-220SPW-419196
RAS-6WHNPE + RWM-6.0N1EPW-619195

Entries as published in the official lists on the date shown; names and numbers are copied verbatim. Check the list for your exact model before you order.

Sources

  1. Product page: www.hitachiaircon.com/de/de/sortiment/heizungswaermepumpe-fuer-ihr-zuhause/yu...
  2. BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
  3. Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
  4. EEBUS certified devices – checked November 2, 2026

All figures are taken from the manufacturers' datasheets and the official BAFA and ZUM lists on the date shown and may have changed since. This is not grant advice – check the list and your grant conditions before you order. Zerofy is not affiliated with any of the manufacturers listed.

SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.

Heat with your own solar power

Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.

Get Zerofy