Photo: Clivet
Hot waterR290
Clivet Aqua F
Hot water heat pumps · 4 models
Indoor R290 hot water heat pump with an enamelled 190 or 300 l tank (S = version with solar coil), class A+. Heat-pump-only operation with outdoor air from -7 to 43 C (extended range with the heater), ducted or recirculating air, up to 8 units in cascade. The datasheet header gives 1.2 kW (190 l) and 1.5 kW (300 l); the table values are at 15 C air and 15 to 45 C water.
Grant lists
Grants depend on the exact model being on the official list. The counts below are the entries of this series we found in each list.
BAFA WEP (Germany)
Not confirmed
We could not match this series against the BAFA list reliably – look up your exact model in the portal.
checked November 4, 2026
ZUM (Poland)
No model on the list
No model of this series is on the Lista ZUM, so it cannot be funded under Czyste Powietrze.
checked November 4, 2026
Specifications
| Type | Hot water heat pumps |
|---|---|
| Heating output (datasheet) | 1.2–1.5 kW |
| SCOP at 35 °C | – |
| SCOP at 55 °C | – |
| Refrigerant | R290 (GWP 3) |
| Outdoor sound power | 55–56 dB(A) |
| Max. flow temperature | – |
Heating output is the figure in the manufacturer's datasheet; the basis (nominal output at A7/W35 or B0/W35, or design heat load) differs between brands, so check the datasheet before comparing. * = design heat load Pdesignh at 35 °C from the BAFA portal.
Control and connectivity
| SG Ready | Yes |
|---|---|
| Modbus | Yes (RTU) |
| EEBUS | Not documented |
| Cloud API | not confirmed (Clivet Eye) |
| §14a EnWG control | not confirmed |
| Local interfaces | SG Ready, Modbus RTU, relay input |
Source: asset.source.thenbs.com/api/pdf/a36abf7f-1f97-436b-9bdd-4... · asset.source.thenbs.com/api/pdf/d62fd1de-ca60-4971-b97d-4...
Zerofy
Via SG ReadyZerofy has no native Clivet integration yet, but this series has an SG Ready input: Zerofy can switch it through a Shelly relay on the SG Ready terminals.
Models in this series
Model codes as the manufacturer documents them. The official list entries, with their own naming, follow below.
More Clivet heat pumps
Sources
- Datasheet: asset.source.thenbs.com/api/pdf/d62fd1de-ca60-4971-b97d-4f23ee94acee
- Product page: www.clivet.com/en/products/home-solutions/heat-pump/aqua-f
- Control and connectivity: asset.source.thenbs.com/api/pdf/a36abf7f-1f97-436b-9bdd-451c23fd07e2
- Control and connectivity: asset.source.thenbs.com/api/pdf/d62fd1de-ca60-4971-b97d-4f23ee94acee
- BAFA Wärmeerzeuger-Portal – Wärmepumpen – checked November 4, 2026
- Lista ZUM (Instytut Ochrony Środowiska) – checked November 4, 2026
- EEBUS certified devices – checked November 2, 2026
All figures are taken from the manufacturers' datasheets and the official BAFA and ZUM lists on the date shown and may have changed since. This is not grant advice – check the list and your grant conditions before you order. Zerofy is not affiliated with any of the manufacturers listed.
SG Ready is a label of the Bundesverband Wärmepumpe (BWP) e.V.; “Yes” means the manufacturer documents the two-input interface or declares it on the BAFA portal, not that the series carries the BWP label – the label list is at waermepumpe.de. EEBUS is a standard of the EEBus Initiative e.V.; Modbus is a registered trademark of Schneider Electric, licensed to the Modbus Organization. Product names, logos and photos belong to their manufacturers and are shown to identify the products. Grant data: BAFA Wärmeerzeuger-Portal and Lista ZUM (IOŚ-PIB) as of the dates shown; the SCOP at 55 °C in the BAFA tables is calculated by Zerofy from the portal's ηs value.
Heat with your own solar power
Zerofy moves your heat pump's runtime into the hours with surplus solar power or low prices – automatically.
Get Zerofy